Categories

New Era Pump Systems NE-1000 Single Syringe Pump

The NE-1000 has a Space Saving Chassis: Foot print size so it won't take up unnecessary space on your laboratory or production bench.
Manufacturer: New Era Pump

Description:

  • Holds 1 Syringe up to 60 cc*
  • Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
  • Easy-to-use keypad interface
  • Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
    Won't take up unnecessary space on your laboratory or production bench

Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump

Using 2 NE-1000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

Features:

  • Fully programmable; automation capable
  • Operates stand-alone or from a computer
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Motor stall detection
  • Dispensing accuracy of +/-1%
  • Unlimited lifetime technical support
  • Two year warranty
 
 

Example Flow Rates (NE-1000):

 
Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr)
0.5 µL 25.49 0.001
1 mL 53.09 0.73
3 192.5 2.646
5 406.1 5.581
10 600 8.244
20 975.8 13.41
30 1282 17.63
60 2120 29.13
 
Sample syringe configurations, can hold any size syringes below 60 cc.

Maximum syringe size:

Although a maximum of a 60 cc syringe is specified, the pump can hold up to a 140 cc syringe but can only open up to about 120 cc lengthwise

High pressure notes:

The NE-1000 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi

The high pressure version, NE-1010, will approximately double the pumping force at the same speeds.

*** Not for clinical use on humans ***  pic

 

 

HEATER KIT - Click here to select your heater Kit/Pad if needed

 

 

Save

Save

Save

Save

Picture of NE-1000-US - One Channel Syringe Pump, US Power Supply
Product photo may not exactly match the product offered for sale. Please refer to the product description.
NE-1000-US - One Channel Syringe Pump, US Power Supply
Manufacturer part number: NE-1000-US
$714.99
NE-1000-ES - One Channel Syringe Pump, European Power Supply
Manufacturer part number: NE-1000-ES
$714.99
NE-1000-BS - One Channel Syringe Pump, British Power Supply
Manufacturer part number: NE-1000-BS
$714.99
Picture of NE-1050-US One Channel 80 cm/min Syringe Pump, US Power Supply
Product photo may not exactly match the product offered for sale. Please refer to the product description.
NE-1050-US One Channel 80 cm/min Syringe Pump, US Power Supply
Manufacturer part number: NE-1050-US
$1,071.00
Picture of CBL-USB-232  - RS-232 To USB Converter
Product photo may not exactly match the product offered for sale. Please refer to the product description.
CBL-USB-232 - RS-232 To USB Converter
Manufacturer part number: CBL-USB-232
$15.00
FW-1-X
Manufacturer part number: FW-1-X
$105.00
FW-1-X2
Manufacturer part number: FW-1-X2
$205.00
NUTBLOCK-SPS-20 Single Channel Low Pressure Releaseable Nut Block (NE-300, NE-1000, NE-500 & NE-501)
Manufacturer part number: NUTBLOCK-SPS-20
$50.00
PWRSUP-BS - Power Supply British 12VDC 1A 2.1mm
Manufacturer part number: PWRSUP-BS
$12.50